Dirt damages the beautiful surface of watercolor on paper, and ultraviolet light fades delicate washes. Watercolor paintings need protection when on display. Acrylic sheeting and art conservation glazing options have widened the choices beyond traditional framing behind glass. However, museum-grade UV non-reflective glass and acrylic glazing can be expensive and add weight when shipping artwork. Are there alternatives that might offer equal protection against damaging UV light?
Varnishing offers one way to liberate watercolor painting from the cage of glass and frame. We have received numerous questions about varnishing watercolors, and even have an Application Information Sheet discussing the process.1 Since GOLDEN Varnishes shield paint from UV light, they should protect against light-related fading of watercolor paint. How does our Gloss Archival MSA Varnish with UVLS2 compare with other protection options when watercolor on paper is exposed to light? We conducted testing to find out.
Comparative Lightfastness Protection Testing
Protecting watercolor paintings from potential light-related fading can be an important display consideration. Watercolor paint has very little binder, which exposes the pigment particles more to light than if the same pigment were in acrylic or oil paint. The American Society for Testing and Materials (ASTM) provides separate lightfastness tables for pigments in each of these painting mediums, and a pigment often has less lightfastness in watercolor.
ASTM refers to a “Delta E” unit when determining how much change exposure to light creates in paint.3 A single unit of Delta E is the minimum amount of change noticeable to an average viewer. For lightfastness of artists’ paints, ASTM designates from 0 to 4 Delta E units of color change as Lightfastness I (Excellent), over 4 to 8 as II (Very Good), over 8 to 16 as III (Fair, Not Permanent), over 16 to 24 as IV (Poor, Fugitive), and a Delta E greater than 24 units as V (Very Poor, Fugitive). High quality artist-grade paints are Lightfastness I or II.
For comparative lightfast protection testing, we measured Delta E in light and medium watercolor washes from three different colorants: 1) PR255 or QoR Pyrrole Red Light, rated Excellent (Lightfastness I) in watercolor by ASTM; 2) a fugitive fluorescent pink dye; and 3) PR83 or true Alizarin Crimson. Alizarin Crimson was one of the pigments first tested when ASTM developed lightfastness testing procedures for artists’ paints, and ASTM rates paints made with this pigment as having Poor (IV) lightfastness in watercolor.4 Since QoR® Modern Watercolor does not contain paint with PR83 or fluorescent dye, our formulators created these two watercolors for our test. The dominance of fugitive paints in our investigation created a ‘worst case scenario’ to push the limits of the coating’s ability to provide protection against light exposure.
Diluting each of the paints with distilled water, we painted multiple medium and light intensity washes (mw, lw) on Arches® Natural White 140 lb. (300 gsm) Cold Press Watercolor Paper. The dilution ratio and wash intensity were judged by eye. We evaluated dry washes for evenness and similarity in value, and then flattened those selected. Squares of each wash would be kept as unexposed controls or protected by the coatings to be tested for lightfast protection.
Before exposing the swatches to light, we needed a starting point reading against which to compare potential changes to color. We used an X-Rite VS450 spectrophotometer with CIE L*a*b* color space (CIE 1976) to read and record color in five spots on each watercolor wash square. Averaging these readings provided a pre-exposure control analysis of the color on that particular square.
We employed a QUV booth to subject the swatches and their protective coatings to light using accelerated UV exposure testing. The QUV’s UVA fluorescent ultraviolet bulbs provided a UV spectrum similar to sunlight through window glass.5 Each 400-hour cycle of accelerated exposure provided the rough equivalent of about 33 years of museum lighting. Three separate sets of swatches were exposed for 400, 800, and 1200 hours in the QUV, which created comparative readings for approximately 33 years, 66 years, and 99 years of illumination. Moisture levels in the chamber fluctuated with the ambient low humidity of a New York winter, and testing temperature was set to 60° C.
Painted swatches in the QUV were either bare or covered with a potential protectant, as our test targeted the following coating options:
- No Coating: Not covering the watercolor on paper at all would be a worst-case scenario.
- Regular Glass: This was the original option when framing a watercolor, and many artists continue to use it.
- Tru Vue® Optium Museum Acrylic®:6 Described as an Art Conservation option, this blocks up to 99% of UV, providing a gold standard of lightfast protection when framing a watercolor. It also resists abrasion, will not shatter, is anti-static, and non-reflective.7
- GOLDEN Gloss Archival Varnish with UVLS in two, four, and six sprayed layers: This is the aerosol version of our MSA Varnish. What protection does Archival Varnish offer, and how do the results compare to the other options being tested?
This range of coatings allowed us to test possibilities in use by artists today. The potential differences between Delta E readings of swatches exposed through regular window glass, Tru Vue Optium Museum Acrylic, and GOLDEN Archival Varnish with UVLS were especially important.
After exposure, we read each square again in five spots and averaged the readings into a post-exposure analysis of the color on that square. Again using the spectrophotometer, we compared the pre- and post-exposure readings to determine the amount of change for that particular square. This change is its Delta E number. Each square represents a specific combination of watercolor paper and watercolor paint used, wash applied, protective coating (if any), and exposure hours. In all, each of the 342 squares was read 10 times for a total of 3,420 spectral readings. We averaged the three swatches for each test option into a single Delta E representing that test combination.
Lightfast Testing Results
Tables 1 and 3 present the averaged results of 400 and 1200 hour exposures. As can be seen in these tables, even the non-exposed control swatches show a small variance between their comparative averages. This may be attributed to inconsistencies in hand-painted washes and slight differences in placement when being measured. Although the chart is not included here due to space limitations, the 800 hour Delta E readings (Table 2) can be found in the JustPaint.org version of this article. It should be noted that while our results provide information on behaviors within the strict parameters of this test, watercolor and UV protectants might interact differently in other applications or over time in real-world lighting situations.
At 400 hours, protection provided by Tru Vue, four coats, or six coats of Gloss Archival Varnish provided excellent protection for the watercolor test swatches. All of their painted samples remained under Delta E 4 and within the ASTM Lightfast I (LF I) range, with Tru Vue providing slightly better protection. All Pyrrole Red Light washes in the 400 hour exposure stayed LF I. In comparison, while two coats of Gloss Archival Varnish protected the other washes, Fluorescent Pink earned LF III ratings for both washes. With glass, both of the Alizarin Crimson washes and the light Fluorescent Pink wash earned LF III, and the medium Fluorescent Pink fell to LF V. After 400 hours of exposure, the unprotected Alizarin Crimson and Fluorescent Pink light washes both earned a LF IV. Unprotected medium washes fell to LF IV for Alizarin Crimson and LF V for Fluorescent Pink.
At 1200 hours, all of the washes remained in LF I when protected by six coats of Gloss Archival Varnish. Tru Vue kept all but the Fluorescent Pink (FP) medium wash in LF I, with this wash falling to LF II. With four coats of Gloss Archival Varnish, both Fluorescent Pink washes were in LF II and the other washes remained in LF I. Under two coats of Archival Varnish, a light wash of Alizarin Crimson (AC) rated LF II and a medium wash LF III; a light wash of Fluorescent Pink fell to LF III and a medium wash to LF V. Regular Glass and ‘exposed not covered’ readings for light washes of Fluorescent Pink and Alizarin Crimson were LF III. Both of their medium Alizarin Crimson washes came in at LF IV, and the medium Fluorescent Pink earned LF V.
In keeping with its ASTM rating, Pyrrole Red Light remained in the LF I category for all but the ‘exposed not covered’ light wash at 1200 hours, which earned Delta E 4.23. This is slightly over the border into LF II. Since this pale wash had less pigment than the 40% reflectance wash used for ASTM lightfast testing, this rating is not surprising.
Varnishing changes the aesthetics and nature of watercolor on paper (Figure 1). However, because the current testing only focused on lightfastness vs aesthetics, this issue was compounded by our choice to only apply Gloss varnish since it allowed for the best color measurements. The downside is the fact that multiple layers of Gloss varnish in particular can create an almost laminated look. Because of that, we hope to show in a future article some of the ways to minimize this by using a combination of Gloss and Matte varnishes. Looking at current results, six coats of Gloss Archival Varnish did an excellent job with lightfast protection. However, six coats also filled in the paper texture and created an extremely glossy acrylic surface. From certain viewing angles, light reflecting off this coating obscures the painting. With four sprayed varnish coats, the surface is less glossy, the paper texture still has a presence, and reflective light is broken rather than continual. With two coats, there is more texture and less varnish, which results in a very slight glistening quality with reflected light. Varnishing also can create permanent changes to color and light-dark values within the work. It is always good to test to be sure the changes are acceptable.
In contrast, the almost invisible and removable protection offered by Tru Vue® offers very little change to the aesthetics of the watercolor, and allows the surface of the paper to maintain its unique and subtle interplay with light. When taking into account lightfastness protection, preservation of a watercolor on paper’s unique surface, and the traditional aesthetics of a watercolor painting, Tru Vue® provides an excellent option.
Our investigation used a majority of paints with poor lightfastness, which provided a harsh test of protection against the damage created by ultraviolet light. Regular glass and two coats of Archival Varnish (Gloss) did not prove effective against fading of fugitive paints due to UV light. Protection increased with more layers of varnish. Although four coats of Varnish provided some protection, six layers of Archival Varnish (Gloss) kept all of the test squares within a Lightfast I category when exposed to the equivalent of about 99 years of museum lighting. Except for the Fluorescent Pink medium wash, Tru Vue® Optium Museum Acrylic® also kept all colors to Lightfastness I with 1200 hours of exposure. Regular glass did not provide this protection. Pale washes of even LF I paints may fade with a century of exposure to ultraviolet light, and our testing suggests that the protection of as few as two layers of varnish can help prevent those color changes. For artists who embrace the aesthetic changes created by varnishing and are interested in pushing the boundaries of traditional watercolor, GOLDEN Archival MSA Varnish offers a valuable option for lightfastness protection of transparent watercolor on paper.
1Golden Artist Colors, “Application Information Sheet: Varnishing Watercolors with GOLDEN Products,” http://www.goldenpaints.com/technicalinfo/technicalinfo_varnwatercolor (accessed 4/4/2016).
2UVLS stands for Ultraviolet Light Stabilizers and is the component in the varnish that provides lightfastness protection to the artworks over which they are applied.
3For more information, see Sarah Sands, “Delta E: A Key to Understanding Lightfastness Readings,” Just Paint, https://justpaint.org/delta-e/ (accessed 3/30/2016). According to ASTM D4303-03 “Standard Test Methods for Lightfastness of Colorants Used in Artists’ Materials,” a spectrophotometer and the CIE L*a*b* color space (CIE 1976) are to be used to determine Delta E. This analysis of color change is based upon comparing pre-exposure spectrophotometer readings and post-exposure readings of a paint’s color. Larger numbers represent more damage from light and greater change to the color.
4ASTM D5067 “Standard Specification for Artists’ Watercolor Paints,” p. 2, 6.
5“Sunlight, Weathering & Light Stability Testing,” Q-Lab Technical Bulletin
LU-0822, rev. 2007, p. 6, Q-Lab.com. http://www.q-lab.com/, http://www.q-lab.com/documents/public/cd131122-c252-4142-86ce-5ba366a12759.pdf (accessed 4/12/2016).
6“Tru Vue® Optium Museum Acrylic®,” Tru-Vue.com, http://Tru-Vue.com/solution/optium-museum-acrylic/ (accessed 3/30/2016).
7“Product Comparison for High Performance Acrylic and Glass Solutions,” Tru-Vue.com, http://Tru-Vue.com/wp-content/uploads/2015/12/TRU_5954_AcrylicSellSheet_V2.pdf and
“Acrylic Collection Fact Sheet (English),” http://tru-vue.com/museums-collections/samples-literature/ accessible via “Technical Info and Resources,” “Tru Vue® Optium Museum Acrylic®,” Tru-Vue.com, http://Tru-Vue.com/solution/optium-museum-acrylic/ (accessed 4/11/2016).